Felt Leaf Wall Decor DIY


Fall decor season is right here! I wished to make a big wall hanging for fall that didn’t take a number of time, and for those who didn’t already know, chopping issues out of felt is a good fast approach to get some large textural shapes in your DIY initiatives. So long as you may minimize shapes out with scissors and do some extraordinarily minimal stitching, this fall wall decor DIY may be up very quickly!

Provides:
-felt within the colours of your selecting (I used shades of euphoric gold, and Georgia peach, butternut squash, and grapefruit from this store)
leaf templates (proper click on to obtain)
-fabric scissors
picket beads (I used the 12mm dimension)
twine (1.5mm thickness is what I used)
giant needle sufficiently big to suit your twine
1/2″ dowel rod minimize to about 30″ lengthy
-drill and drill bits

Obtain the leaf template and hint the leaf sample onto your felt sheets so you’ve gotten a number of completely different shapes in a number of completely different colours.

To arrange your dowel rod, minimize it to size if it’s longer than you need, and drill a gap via every finish (about 1″ away from the sting) that’s sufficiently big in your twine to undergo. Lower a protracted piece of twine and thread every finish via the holes and tie so you’ve gotten a string to hold your wall hanging from (modify the size of string to your liking).

Subsequent, you’ll need to take your leaves and thread your needle with some twine so you may create a little bit of a line down your leaf with the stitching.

Make a knot at one finish of the twine, trim the surplus, and are available via the entrance of the leaf close to the underside so the knot might be hidden in again. Then, make some giant even stitches out and in up the leaf till you get to the highest as you see within the images above. Make one other knot and add some picket beads to your twine. Tie your leaves at various lengths so they’re staggered in top and slide them shut collectively till they’re nearly touching. Trim the surplus string from the twine and you’re prepared to hold!
I like how easy the wall hanging is but it surely nonetheless feels an enormous hug of fall emotions once you stroll into the room. In fact, you may modify the colours, dimension of leaves, or variety of leaves to your liking, so be happy to customise it as you see match. Hope this helps carry somewhat contact of fall to your house this yr! xo. Laura

Felt Leaf Wall Decor DIY

  • felt within the colours of your selecting
  • leaf templates 
  • cloth scissors
  • picket beads (I used the 12mm dimension)
  • twine (1.5mm thickness is what I used)
  • giant needle sufficiently big to suit your twine
  • 1″ dowel rod minimize to about 30″ lengthy
  • drill and drill bits

  1. Obtain the leaf template and hint the leaf sample onto your felt sheets so you’ve gotten a number of completely different shapes in a number of completely different colours.

  2. To arrange your dowel rod, minimize it to size if it’s longer than you need, and drill a gap via every finish (about 1″ away from the sting) that’s sufficiently big in your twine to undergo. Lower a protracted piece of twine and thread every finish via the holes and tie so you’ve gotten a string to hold your wall hanging from (modify the size of string to your liking).

  3. Subsequent, you’ll need to take your leaves and thread your needle with some twine so you may create a little bit of a line down your leaf with the stitching.

Credit // Writer and Pictures: Laura Gummerman. Pictures edited with A Shade Story Desktop.

Leave a Reply

Your email address will not be published. Required fields are marked *